021-61646755

中文

Location: Home > Products > Electrochemical Sensor > Digital Conductivity Sensor >Digital Ion-Selective Sensor -EC Graphite electrode

Products Electrochemical Sensor Digital Conductivity Sensor Digital Ion-Selective Sensor -EC Graphite electrode
Digital Ion-Selective Sensor -EC Graphite electrode
Digital Ion-Selective Sensor -EC Graphite electrode

Digital Ion-Selective Sensor -EC Graphite electrode

1. Check the technical performance parameters to confirm whether the selected products are consistent with the application environment;

2. Before installation, please read the operation manual carefully and make clear the wiring sequence, pressure, temperature and installation requirements of instrument/sensor;

3. Activation calibration (Before leaving the factory, the sensor has completed the basic calibration; If there is a large deviation or unsatisfactory measurement data, the calibration can be completed by oneself)

Classic application
Characteristic advantage
Technical parameter
ModelECRS-5-MS300
Schematic Diagram42.jpg
electrode type- 10 ℃~180 ℃ (PT1000 temperature automatic compensation)
pressure rangetwo-stage graphite
conductivity cell constantK=1.0
<measurement rangeConductivity: 1 μ S/cm-100 mS/cm
TDS: 0-10000ppm (mg/L)
Salinity: 0-70ppt (NaCl)
Resolution0.001/0.01/0.1
Measurement accuracy< ± 1% of measured value
response time< 5s  & nbsp; & nbsp; & nbsp; & nbsp; & nbsp;
Repeatability<measured value ± 1%
communication interfaceRS485, standard Modbus RTU protocol (analog signal 4-20MA optional)
size specificationD: 30mm L: 150mm, Cable 5m (customizable)
working environment0~80 ℃/0-6Bar pressure
housing materialPPS
working voltage12V (customizable 5V or 24V)
power consumption≤ 1W
<weightapprox. 220g (excluding wires)
Commonly used consumables
Concentration reference table
Order information